User Manual
.06.
INSTRUCTION MANUAL
TROUBLESHOOTING
If you feel the appliance is not working properly, follow these instructions to try to see
if you can solve the problem simply by yourself before calling for service.
No. PROBLEM PROBLEM POSSIBLE CAUSE / MEASURE
1 Refrigerator does not operate
Not plugged in.
The circuit breaker tripped or a blown fuse.
2 Refrigerator does not operate
The room temperature is hotter than normal.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The refrigerator does not have the correct clearances.
Abnormal voltage.
3 The light does not work.
Not plugged in.
The circuit breaker tripped or a blown fuse.
The LED light has burned out.
4 Vibrations. Check to assure that the refrigerator is level.
5 The door will not close properly.
The refrigerator is not level.
The door was reversed and not properly installed.
The gasket is dirty.
The shelves, bins, or baskets are out of position.
ENERGY SAVING AND ECOLOGICAL PROTECTION
Please pay attention to the following special instructions for saving energy
and ecological protection:
● MB-36G is intended to be used exclusively for the pantry, and it’s not
suitable for storing food.
● MB-36B is intended to be used exclusively for the cellar.
● These refrigerating appliances are not suitable for the freezing foodstuffs.
● The pantry MB-36G is recommended to be designed at 17
ºC
. While the
cellar MB-36B is recommended to be designed at 12
ºC.
● The shelves placed in factory mode is the most efcient use of energy for
the refrigerating appliances.
● The following combination of shelves is recommended for energy to be
used as efciently as possible by the refrigeration unit. There is one shelf
inside cabinet in total.