User Manual

empower your supply chain.
V1.0-12/2021-DE · Technical Changes and Errors excepted 11
- OpenthedriveandcopythePDFandCSVreportstoredonitforyourling.
- Note:AreportisautomaticallygeneratedasPDFand/orCSVwhenthedeviceisstopped.Thedevice
can still be read out during a running measurement and an intermediate report can be downloaded.
- Note: Already generated reports are automatically overwritten and deleted when the device
is restarted.
Readout with the tempbase 2 software (optional)
- Remove the cap and connect the logger to your PC.
- Open the tempbase 2 software and select the „Export/Import“ button (3).
- Selectthedesiredleformat(PDF/XLS/IME)forexportandthelelocationandconrmthedownload.
7. External Sensors
- Remove the cap and connect the not started logger to your PC.
- Open the tempbase 2 software and select the „Logger Setup“ button.
- In the „Sensor Type“ area, select the sensor type you want to work with.
- Conrmyourcongurationbyclickingon„SaveParameter“andremovethedevicefromyourPC.
- To record with an external sensor, use a screwdriver to loosen the screw on the bottom of the device
and remove the standard cap.
- Replace it with the external sensor of your choice and screw it again.
8. Replace Battery
- Open the cover on the back of the device by turning it counterclockwise.
- Remove the old battery and dispose of it according to national regulations.