empower your supply chain. Table of content 1. Introduction ............................................................................................................................................................................................ 3 2. Intended Use ...........................................................................................................................................................................................3 3. tempmate.®-M2 Model ................................
empower your supply chain. tempmate.®-M2 Model Multi-Use Temperature Rel. Humidity LCD V1.
empower your supply chain. 4. Device Description 5. Display LED LCD Not Started Number Measured Values Average Value Started* Highest Measured Value MKT Value Stopped Lowest Measured Value Time & Date Start Button Stop Button Sensor rel. Humidity LED LCD Start Button Stop Button * if the start delay is set, this symbol flashes after a successful start until the time limit has elapsed V1.
empower your supply chain. 6. Operation and Usage STEP 1 Configuration *optional This step is only necessary if you want to adapt the pre-installed configuration to your application. - Download the free tempbase 2 software – https://www.tempmate.com/de/download/ Install the tempbase 2 software on your PC. Remove the cap and connect the not started logger to your PC. Open the tempbase 2 software and select the „Logger Setup“ button“ (1).
empower your supply chain. - Open the drive and copy the PDF and CSV report stored on it for your filing. Note: A report is automatically generated as PDF and/or CSV when the device is stopped. The device can still be read out during a running measurement and an intermediate report can be downloaded. Note: Already generated reports are automatically overwritten and deleted when the device is restarted. Readout with the tempbase 2 software (optional) - Remove the cap and connect the logger to your PC.
empower your supply chain. - Insert the new battery and replace the cover, closing it clockwise. Remove the cap and connect the logger to your PC. Open the tempbase 2 software to synchronize date & time again. This process is automatically trigge red when the logger is connected to PC and software. Caution: Back up your data and download your last report before removing the battery from the instrument. V1.0-12/2021-DE · Technical Changes and Errors excepted 9.
empower your supply chain. Main Technical Specifications tempmate.®-M2 Main Technical Specifications tempmate.
empower your supply chain. Main Technical Specifications tempmate.®-M2 Accessory tempmate.®-M2 External T-Sensor tempmate.®-M2 External T/rH-Sensor Sensor HQ Digital Temperature Sensor Sensor HQ Digital Temperature/rel. Humidity Sensor Temperature Range –40°C to +90°C Temperature Range –40°C to +90°C Temperature Accuracy 0.3°C (at –20 ° C to + 40 ° C, other 0.5°C) Temperature Accuracy 0.3°C (at –20 ° C to + 40 ° C, other 0.5°C) Temperature Resolution 0.
empower your supply chain. Contact Do you have any questions? Please contact us - our experienced team will be happy to support you. sales@tempmate.com +49 7131 6354 0 V1.
tempmate GmbH Wannenäckerstr. 41 74078 Heilbronn, Germany Tel. +49-7131-6354-0 sales@tempmate.com www.tempmate.
