User Manual

ManualsBrandstempmate ManualsData Loggertempmate M1 Multiple Use PDF Temperature Data Logger

Table Of Contents

Unbenannt

User Manual

• For tempmate.®-M1 Multiple-Use PDF Temperature Data Logger

Theme Page

01. Technical data

02. Device operation instruction

03. Initial use

04. Key function description

05. Battery management

06. LCD display notice

07. Appendix 1 – working status description

08. Appendix 2 – other LCD display

09. Appendix 3 – LCD page display

 Summary

Product: tempmate.®-M1 Data Logger

Scope: Operations Instructions

This data logger is mainly used to detect the temperature of food, pharmaceuticals, chemicals and other products

during transportation or storage. The main features of this product: multiple use, automatically generated PDF report,

high waterproof level, battery exchangeable.

tempmate GmbH

Germany

Wannenäckerstr. 41

74078 Heilbronn

T +49 7131 6354 0

F +49 7131 6354 100

info@tempmate.com

www.tempmate.com

Summary of content (6 pages)

PAGE 1
User Manual i • For tempmate.®-M1 Multiple-Use PDF Temperature Data Logger Product: tempmate.®-M1 Data Logger Scope: Operations Instructions • Summary Theme Page 01. Technical data 2 02. Device operation instruction 2 03. Initial use 2 04. Key function description 4 05. Battery management 4 06. LCD display notice 5 07. Appendix 1 – working status description 5 08. Appendix 2 – other LCD display 5 09.
PAGE 2
User Manual i For tempmate.®-M1 Data Logger 01. Technical data • Technical Specifications Temperature sensor NTC internal and external optional Alarm settings Adjustable up to 5 alarm limits Measuring range –30 °C to +70 °C Alarm type Single alarm or cumulative Accuracy ±0.5 °C (at –20 °C to + 40 °C) Battery CR2032 / replaceable by customer Resolution 0.
PAGE 3
User Manual i For tempmate.®-M1 Data Logger 03.3 Pause operation Double click left key to enter the pause status. Under pause status, the device only records time instead of temperature recording. By double click left key again, the pause operation is canceled and set to normal temperature recording again. ATTENTION: The command done by the button press, will be accepted by the device if the display has been activated by briefly pressing the left button beforehand. 03.
PAGE 4
User Manual i For tempmate.®-M1 Data Logger (3) During the tempmate.®-M1 is connected with the computer, the M1 is generating a PDF report depending on the configuration: • If tempmate.®-M1 is stopped, it always generates a report when the M1 is plugged in the USB port • If tempmate.®-M1 is not stopped, it only generates a PDF when it is enabled in the “Logger Setup” 03.7 Multiple start The tempmate.
PAGE 5
User Manual i For tempmate.®-M1 Data Logger 06. LCD display notice Alarm LCD display When LCD display time is configured to 15 s, click left key to activate the display. If over temperature incident occurs, it firstly displays alarm interface for about 1 s, then skips to main interface automatically. When display time is configured to “forever”, over temperature alarm occurs permanently. Press left key to skip to main interface. When display time is configured to “0”, there is no display available. 07.
PAGE 6
User Manual i For tempmate.®-M1 Data Logger 09. Appendix 3 – LCD page display Page LCD display Page Page 1 Page 7 Battery level, current working status (record, stop, etc.) upper/lower limit status, current temperature Upper limit 2 LCD display upper limit alarm occurs lower limit alarm occurs Page 2 Page 8 Battery level, current working status, recording points Setting temperature of upper limit 2 Page 3 Page 9 Battery level, current working status, MAX.