User Manual

empower your supply chain.
11V1.0-02/2022-DE · Technische Änderungen und Irrtümer vorbehalten
7. Operation and Usage
STEP 1 StatusCheckfornotstarteddevice
Pressoncethegreen“START”buttonandthescreenwilldisplaytheword“SLEEP”indicatingthattheloggeris
currently in not started state.
STEP 2 Starting the device
Continuouslypressthegreen“START”buttonformorethan5sec.
Thescreenstartsashingtheword“START”indicatingtheloggerstart.Atthistime,theiconisdisplayedon
theleftsideofthescreen,indicatingthattheloggerhasbeenturnedon.
STEP 3 Start-up delay
If“Startupdelay”isset,oncetheloggeristurnedonitentersthestart-updelayphase.Theiconisdisplayedon
the right side, indicating that the logger is in the start-up delay phase.
STEP 4 Recordinginformation
Afterenteringtherecordingstate,theiconwillnolongerbedisplayed,andthealarmstatuswillbedisplayedin
thelowerleftcornerofthescreen:
the temperature is normal.
the threshold has been exceeded.
HI the high threshold has been exceeded.
LO the low threshold has been exceeded.