User manual

Cyclone Enclosure User Manual page 32
Control Display
The display on the Control display provides additional status information, depending on the
operating mode:
Basic Mode & 28˚C 47% internal temperature, relative humidity
Monitor Mode 209V OFF line voltage, lamp status
DMX Mode & 28˚C 47% internal temperature, relative humidity
Service Mode 209V OFF line voltage, lamp status
Alternating with:
DMX: 001 DMX Start Address
No DMX DMX Status
Control Interface Operation
The Control Interface is normally LOCKED.
To UNLOCK, hold ESC and OK together for 5 seconds.
You are now in the CONTROL MENU
Use


to scroll up and down the menu.
Press OK to enter a menu item
Use


to set the item parameter, or to scroll to the next menu level.
Use ESC to go BACK, and OK to confirm settings (
 ).
To LOCK, hold ESC for 5 seconds.
Menu will time out after ten minutes.