User manual

Cyclone Enclosure User Manual page 23
4. Place the Christie Ballast in position and secure in place with the tie-down strap provided
5. Plug the ballast power cable into the 3-phase Ballast Power receptacle provided
6. Plug the two Camlok tails into the ballast. BE SURE TO TWIST CLOCKWISE to make a good
connection.
7. Connect the two Interlock cables to the Ballast D-Connectors and connect Aux power to
the projector to the Ballast Aux power outlet.
8. Replace the Enclosure cover.
Ballast
Tie-down Strap
Interlock
Connectors