Data Sheet

Tel：[phone] / 30 http://www.temolin.com
Temolin Technology, I n c .
Wireless with Temolin
Wireless with Android
Wrireless on your device
159
RDP0
LVDS
Camera1 MIPI Data0+
160
GND
VSS
Ground
161
RCN
LVDS
Camera1 MIPI Clock-
162
RCP
LVDS
Camera1 MIPI Clock+
246～
265
GND
VSS
Ground
5.1 Power Supply
M101C provides four VBAT pins dedicated to connection with the external power supply. VBAT pins
(pin 55/56) are used for M101C power supply part. The power supply range of this module is 3.5V~
4.3V, the suggestion value is 4 V.
5.2 Decrease Power Voltage Drop
The power design for the module is very important. Make sure the input voltage will never drop
below 3.1V, even if the peak current reaches 2.5A. If the voltage drops below 3.1V, the module will
be turned off automatically
T im e
V oltage
4V Power Drop
3.4V Auto Shutdown
Current Consume
Peak 2.5A
Figure: Voltage Drop on Peak Current diagram
To decrease voltage drop, a bypass capacitor of about 100µF with low ESR should be add. Multi-
layer ceramic chip (MLCC) capacitor is recommend to be used due to its ultra-low ESR. Two ceramic
capacitors (100nF, 33pF) are recommend to be applied to the VBAT pins. The main power supply
from an external application has to be a single voltage source and can be expanded to two sub