Indoor Fireplace User Manual

Temco DV5200 Series

78674

6. Relight the main burner in both the HI and LO posi-

tions, and verify proper burner ignition and opera-

tion.

7. Check inlet and manifold pressures. Loosen screw

in test port 1/2 turn to measure pressure. Tighten

screw when measurement is complete.

Pressure ranges are:

Gas Supply Pressure (inches w.c.)

Minimum Normal Maximum

LP (Propane) 10.8 11.0 14.0

Manifold Pressure (inches w.c.)

Normal (Hi) Normal (Low)

LP (Propane) 10.0” 6.3”

Manifold pressure can be measured by using a 5/16”

I.D. hose in the right hand side of the valve and con-

necting a manometer. Two test gauge ports are acces-

sible for test gauge connection:

1. Tap on the left side of the valve will give inlet supply

pressure.

2. Tap on the right side of the valve will give manifold

pressure.

Min. Input Max. Input

DV5200MBP 17,500 25,000