User's Manual

FOREWORD

A word about the significance of our UL Listings: These UL Listings allow the Telguard

models to meet

certain requirements of insurance companies, fire marshals, building inspectors and other regulatory

authorities in burglary and fire alarm service as follows:

1. In Burglary Alarm Service:

When used in conjunction with a UL listed central station burglary alarm

control unit with integral or Listed DACT, the combined control communicator (C/C) and Telguard TG-7A

is suitable for central station service

A UL Listing is available in installations where the host Listed burglary alarm control/communicator

transmits through the TG-7A solely on cellular

(“Cellular only”: No Telco; Cellular primary). Also, where

the control communicator is switched to transmit over cellular when it cannot reach the central station

over Telco (“Cellular backup for Telco”: Telco primary; Cellular secondary).

The specific UL Listing for the TG-7A with respect to burglary alarm service is Residential Burglary,

UL1023. Central Station Burglar Alarm Systems, UL1610; Police Station Connected Alarm Systems,

UL365; and Digital Alarm Communicators, UL1635.

2. In Fire Alarm Service (Residential):

When used in conjunction with a Listed central station fire alarm

control unit with a Listed DACT, the combined control communicator and Telguard meet the requirements

for residential fire alarm usage under UL985.

Appendices A3.1 through A3.3.1 (burglary alarm service) and A3.4 through A3.5.1 (fire alarm service) show

the installation configurations and the connections that must be made to meet various UL Listing

requirements.