User's Manual

Phonecell
®
SX6P GSM 4 User Manual
Figure 15 – SX6P AC power connection.
AC Power Cord
Wall Socket
Power Supply
AC Power
Input
Barrel
Connector
Wall-Mounting
1. Remove the mounting clip from the cradle and re-insert it with the tab pointing up - see
Figures 11 and 12.
2. Mark two hole locations 83 mm (3-1/4 inches) vertically apart and drill two holes into the wall.
3. Install the screws (not supplied) into the wall, leaving a gap of approximately 3 mm
(1/8 inches) between the screw head and the wall.
6. Align the mounting holes with the screws and mount the SX6P onto the screws - see Figures
13 and 14.