User's Manual

SX5e USER FEATURES
The SX5e has many user features and setup options that can be accessed using a telephone
connected to the SX5e. To access these features, press the key sequence for the option at any
time. Some options are not available while in a call. See the Call Functions section of this
manual for functions that are allowed while in an active call (In-Call Functions).
All user options have a sequence of digits entered from the telephone keypad. For example, to
change to a UK ringer style, press #
*
100
*
2 #. After the key sequence is entered, the dial
tone will be heard to confirm that the option has been changed or set. If there is an error, three
tones will be heard before the dial tone.
HINT: Make sure to use a tone-dial (DTMF) type telephone when accessing any user feature or
option that requires a key sequence. Pulse dial or rotary dial telephones will not allow key
(DTMF) sequences.
Messages (Voice Mail and Text Messages)
The SX5e is capable of receiving both text and voice mail messages. The Message LED will
flash once a message is received indicating that a text or voice message waiting.
Voice Mail Access
To check for voice mail, dial your voice mail access number and follow the prompts. Contact your
service provider for more information.
Text Messaging (SMS)
The SX5e allows you to send and receive text messages using a Personal Computer (PC). To do
this, you need a PC connected to the SX5e serial port (see the Connecting to a Computer section
of this manual). The SX5e supports the GSM AT command set defined in GSM 07.05 for Short
Message Service (SMS).
Message Indication Clearing
The Message LED will flash until you remove the message notification from the SX5e. After you have
heard or read you messages, you can clear the notification by pressing #
*
112 # on your phone.
NOTE: All text messages will be erased when you clear the notification.
Audio Settings
Line Level
The Line Level option controls the handset volume for any telephones connected to the SX5e.
Press: #
*
69
*
<output level> #
0 = Low
1 = Normal (default)
2 = High
Ringer Styles
The SX5e can be set to use one of three different ringer styles (US, UK, or European). Any
phone connected to the SX5e will ring according to the alert type selected. If the Ringer Style is
set to Off, there will be no audible alert.
Press: #
*
100
*
<line alert option> #
1 = US (default for 1900 MHz model)
2 = UK (default for dual-band model)
3 = European
0 = Off
Dial Settings
Dial Delay
The Dial Delay is the time that the SX5e waits after a number is dialed before automatically
sending the number.
Press: #
*
11
*
<delay> #
The delay must be between 2 and 20 seconds. The default delay time is 3 seconds.
Phonecell
®
SX5e GSM 8 User Manual