User's Manual

11) Click on the Advanced button. Set as shown.
12) Click on OK and Close to back out of each window. Your modem is now set up.
NOTE: When using the SX5D for PC fax operation, make sure the modem connection uses soft-
ware flow control. When using PC data, either hardware or software flow control can be used, as
long as the PC application (and modem) match the SX5D's configuration. The SX5D defaults to
hardware flow control. The following AT commands are used to change the SX5D's flow control.
Enable Software Flow Control: AT+IFC=1,1
Enable Hardware Flow Control: AT+IFC=2,2
Disable Flow Control: AT+IFC=0,0
Phonecell
®
SX5D GSM 45 User Manual