User's Manual

56019201
Pag
e
© 2000 Telular Corporation
22
5.5 S
TEP
5: C
OMPLETE THE
T
ELGUARD
I
NSTALLATION
Last step is to handle loose ends.
5.5.1 Check Settings
Check the jumper setting of J5 (LED mode, out = normal).
5.5.2 Permanently Mount and Properly Ground the Telguard Chassis
Attach earth ground to the green grounding screw located on lower left-hand corner of printed
circuit board assembly and permanently mount the Telguard chassis.