User's Manual

ManualsBrandsTelular ManualsElectronicsCellular Alarm Transmission System

56019201

Pag

If default programming is correct or operating parameters are re-programmed into the Telguard, the installer

calls the Telular IVR and follows the activation procedure to request an activation "ping". The

Communication Center responds with a radio acknowledgement to the Telguard clearing the STC condition

and allowing the Telguard to operate over the cellular radio network. The programmed parameters are

transmitted automatically to the TCC when the Telguard is activated. The installer must perform any changes

to the Telguard programming data since the Communication Center cannot download data to the unit.

2.9 UL L

ISTINGS BY

ODEL

There is a Telguard model designed to meet UL requirements for virtually any residential and commercial

burglary/fire installation. All models contain the same circuitry and perform the same functions. The

difference between models is simply the type of enclosure and type of antenna that is shipped with the unit.

2.9.1

Model T100C001

Economy model T100C001 is UL Listed for Supplemental Use only and is not to be used as a main

or secondary line for a fire or burglar alarm system. This means that the T100C001 will not

enhance nor detract from the grade of service of the UL Listed alarm system being used. Model

T100C001 has a compact plastic enclosure and whip antenna.

2.9.2 Model T200C001

Model T200C001 meets the requirements for Household Burglary, Household Fire, and Commercial

Fire installations. T200C001 has a standard metal enclosure, keylock, and magnetic mount antenna

with 12ft.cable. T200C001 is UL Listed for the following:

♦

UL Household Burglary

♦

UL Household Fire

♦

UL Household Burg/Fire Combination

♦

UL Commercial Fire

2.9.3 Model T300C001

Model T300C001 meets the requirements for all Household Burglary, Commercial Burglary,

Household Fire, and Commercial Fire installations. T300C001 has an attack-resistant enclosure,

keylock, tamper switch, and a magnetic mount antenna with 12ft.cable. Model T300C001 is UL

Listed for the following and UL Listed for Grade A Burglary Certificate installations:

♦

UL Household Burglary

♦

UL Household Fire

♦

UL Household Burg/Fire Combination

♦

UL Central Station Burglary

Grade A

Grade B

♦

UL Police Connect Burglary

Grade A

♦

UL Commercial Fire

♦

UL Commercial Fire and Central Station Burglary Grade A

♦

UL Bank, Safe and Vault

Grade A

3.0 Request Telguard Activation for Cellular Service from Telular

There are two ways that you may activate cellular service for a Telguard. Both methods require the activation

information to be completed and approved prior to installing the Telguard. The Telguard can only be activated when

all the necessary accounting information has been entered into the customer database located at the Telular

Communication Center. The database includes information about the customer account, unit location, and central

station information.

FAX Cellular Service Activation Form

: Complete the Cellular Service Activation Form that is shipped with

each Telguard and fax it to Telular Customer Service, 678-945-1651. Within 24-hours, you will be notified

of service activation.