User's Manual

www.telular.com

Telular SX7P

tings.

Note: The stored phonebook information and messages will not be affected by

restoring the factory settings.

(13). Service Settings

From Menu, select Phone Settings > Service Settings

Note: Service PIN is required to access Service Settings (default 1234).

I. Preﬁ x Area Code

From Menu, select Phone Settings > Service Settings > Preﬁ x Area

Code

You can program a local area code into the unit. Once a local area code

is programmed, all outgoing calls shall have the local area code preﬁ xed

to the dialed digits except for calls where the ﬁ rst dialed digits is 0,1, or 9.

You can activate/deactivate and change preﬁ x area code number via

menu options.

II.Hot Line Number

From Menu, select Phone Settings > Service Settings > Hot Line

This feature allows the phone to connect to a pre-programmed number

automatically. A hot line delay (1 to 10 seconds) is provided, this delay

allows you to dial another number while the delay is timing out. At the end

of the delay time, the hotline number is automatically dialed.

You can program Hot Line Number, Delay and Hot Line On or Off via

the menu item.

III. Dial Delay

Basic Operations