Content 01 Telular SX7P For Your Safety 3 Getting Started 7 1. SIM Card Installation 8 2. Insert Battery 10 3. Charging the Battery 11 4. Connect the handset 12 5. Wall Mounting 13 6. Connect the SX7P to AC Power 15 7. Phone Features 16 8. Function Buttons 18 9. LCD Display Icons 19 10. Service Indication 20 Call Functions 21 1. Making Calls 22 2. Receiving Calls 22 3. Ending Calls 23 4. In-Call Functions 24 www.telular.
Content 02 Telular SX7P 24 5. Conference Calling 25 6. Using the Headset 27 Basic Operations 28 1. Menu Structure 29 2. Special Features 30 3. Messages 35 4. Phonebook 38 5. Call History 40 6. Network Service 45 7. Profiles 46 8. Phone Settings 55 9. Organizer 58 Data Features (SX7P-300G series only) 62 Specifications 64 Warranty Statement www.telular.
For your safety Telular SX7P For Your safety The SX7P functions as both a radio transmitter and receiver. When it is ON, the SX7P receives and sends out radio frequency (RF) energy. The SX7P GSM 900/1800 unit operates in the frequency ranges of 890 MHz to 960 MHz and 1710 MHz to 1880 MHz. The SX7P 850/1900 unit operates in the frequency range of 824MHz to 894MHz and 1850 MHz to 1990 MHz. Both units employ commonly used phase/frequency modulation techniques.
04 Telular SX7P Check the laws and regulations on the use of cellular products in the areas where you drive. Some jurisdictions prohibit your using a cellular device while driving a vehicle. Even if your juris-diction does not have such a law, we strongly suggest that, for safety reasons, the driver use extreme caution when operating the cellular device while the vehicle is in motion. Always obey the law. Electronic Devices Most modern electronic equipment is shielded from RF energy.
Telular SX7P Children Do not allow children to play with your SX7P to prevent damage to the unit. Blasting Areas Construction crews often use remote control RF devices to set off explosives. Therefore, to avoid interfering with blasting operations, turn your SX7P OFF when in a “blasting area” or in areas posted: “Turn off two-way radio.” Turn your SX7P OFF when in any area with a potentially explosive atmosphere. It is rare, but your SX7P or its accessories could generate sparks.
For your safety 06 Telular SX7P in addition, any negligent or illegal act or omission of your or your agents, contractors, servants, employees, or other users of the Product so long as the Product was obtained from you, in the use and operation of the Product.
Getting started 07 Telular SX7P Getting started 1. SIM Card Installation 2. Insert Battery 3. Charging the Battery 4. Connect the handset 5. Wall Mounting 6. Connect the SX7P to AC Power 7. Phone Features 8. Function Buttons 9. LCD Display Icons 10. Service Indication www.telular.
Getting started 08 Telular SX7P 1. SIM Card Installation The SX7P requires a Subscriber Identification Module (SIM) for normal operation. The service provider supplies the SIM card, which carries the account information needed to operate the SX7P. The SIM compartment is on the back of the SX7P. NOTE: If you don’t have a SIM card, contact your network service provider. (1). Make sure the unit is off and the power supply disconnected before removing or installing a SIM Card.
Getting started 09 Telular SX7P (4). Place the SIM card in to the SIM card shaped slot 3)- "ATTERY 0LACE THE 3)- CARD IN THE SHAPED SLOT (5). Gently push the SIM card forward until it locks into position. Note: To remove the SIM push down on the locking tab and slide the SIM back. 3)- "ATTERY #AREFULLY SLIDE THE 3)- CARD UP TO FIT IN THE FINAL POSITION (6). Place the battery back into its compartment (7). Close the compartment door. www.telular.
Getting started 10 Telular SX7P 2. Insert Battery (1). Press the battery access door latch and open the battery access door located on the bottom of the unit; (2). Gently plug the battery cable into the connector; 0USH THE LATCH TO OPEN THE "ATTERY $OOR (3). Place the battery pack into the compartment to fit. (4). Close the battery access door, the latch will lock when completely closed.
Getting started 11 Telular SX7P The SX7P phone is equipped with a rechargeable sealed Ni-MH battery. New batteries are shipped partially charged and should be cycled for best performance. “Cycling” is fully discharging and then fully charging the battery to obtain full capacity. 1.To fully discharge the battery, turn the phone on without connecting AC power and use until “Low Battery” is indicated in the display. 2.Connect AC power, Refer to Page 15, section 6.
Getting started 12 Telular SX7P 4. Connect the Handset Before you can use the SX7P, you must connect the handset cable. (1). Connect the longer end of the handset cable to the phone jack on the bottom of the phone; (2). Gently fit the straight section of the cord in the snake-shaped channel to keep it in position; (3). Connect the other end of handset cable to the handset.
Getting started 13 Telular SX7P 5. Desktop Mounting and Wall Mounting (1) Desktop Mounting Install the mounting bracket as shown on the right to form an extra angle to hold the phone to the best position. (2) Wall Mounting I. Install the mounting bracket as shown on the right to form an 0° angle in order to hold the phone up-right on the wall. www.telular.
Getting started 14 Telular SX7P II. Remove the mounting clip from the cradle and re-insert it with the tab pointing up 2EMOVE THE -OUNTING #LIP FROM THE CRADDLE MM INCHES MM INCHES 2E INSERT THE -OUNTING #LIP WITH THE TAB POINTING UP III. Mark two hole locations 83 mm (3-1/4 inches), or 100 mm (4 inches) vertically apart and drill two holes into the wall. -OUNTING (OLES IV.
Getting started 15 Telular SX7P (1). Connect the USB Type B connector of the power supply to the AC power input on the rear panel of the SX7P. Do Not Twist the Connector. (2). Plug the AC power cube into the wall socket. (3). Press and hold the ON/OFF button for 3 to 5 seconds. (4). Check the cellular signal strength and move the unit until the best signal possible is achieved. Note: Select a location that is above ground and as close to windows (or exterior walls) as possible to get the best signal.
Getting started 16 Telular SX7P 7. Phone Features 53" 4YPE " #ONNECTOR (ANDSET ,#$ DISPLAY #ENTER "UTTON 7AY .AVIGATION "UTTON 3OFT +EYS &UNCTION "UTTONS (EADSET *ACK -ICROPHONE 3PEAKER www.telular.
Getting started Telular SX7P See Illustration on the left: • USB type B Connector On the back side of the phone. AC power input and (SX7P-300 Series)optional data connection • Handset • LCD (Liquid Crystal Display) Displays icons, information, and menu options necessaryto operate the SX7P. • Center Button Shortcut to FM Radio, and selects highlighted menu item. • 4-Way Navigation Buttons Help scrolling up and down Menu Shortcuts to Call History, Keypad and Ring Tone Setting, Messages, and Phone Book.
Getting started 18 Telular SX7P 8. Function Buttons • On/Off Button Used to power unit On and Off, and also used as “Back” key • Message Button This key is used to access voicemail or to send an SMS • Hot Message Button This feature allows a pre-programmed SMS message to be sent. * The SMS message is not user programmable. • Redial Button Dials the last number called from the SX7P.
Getting started 19 Telular SX7P 9.
Getting started 20 Telular SX7P 10. Service Indication • Full Service When powered on, the SX7P will display a wakeup banner (the SX7P300 Series models LCD screen and keypad backlight will also light). After a few seconds, the greeting and mobile carrier will display. If service is available, the antenna icon will display indicator bars. The number and height of the indicator bars increases as the signal grows stronger (the more bars, the better the signal).
Call functions 21 Telular SX7P call functions 1. Making Calls 2. Receiving Calls 3. Ending Calls 4. In-Call Functions 5. Conference Calling 6. Using the Headset www.telular.
Call functions 22 Telular SX7P 1. Making Calls • Pick up the handset or press the Speaker button. The SX7P is now “off-hook.” • Listen for dial tone. • Dial the phone number. The dialed number will be displayed. The name will also be displayed if it is stored in the phonebook. Correct Dialing Errors • To erase one digit, press Delete (right soft key) once. • To erase all digits, press and hold down Delete (right soft key) until all digits are erased, or press the On/Off button momentarily.
Call functions Telular SX7P When there is an incoming call, the SX7P rings, an incoming call notification displays the call type and Caller ID information (if available). • Pick up the handset or press the Speaker button. • Begin talking. Note: Press the Reject to refuse the call. The phone will stop ringing and the calling party will be disconnected or placed into voice mail if activated by your service provider.
Telular SX7P microphone. Place a Call on Hold • While in a call, press Flash button, or press Option (left soft key) and select Hold. • The display will change from A(activated) to H(Held). • To reactivate the call, press Flash button again. or press Option (left soft key) and select Unhold. Adjust Volume While in a call, press the left or right navigation buttons to lower or raise the handset/speakerphone volume. 5.
Telular SX7P conference. Swap: Change the selected party being placed on hold in the call, the caller on hold will be displayed. Phone book: Using this option, user can perform the phone book operations including: access to the list of contacts, addnew entries, copy or delete, etc. While in a Conference Call: I. To place parties of a conference call on hold, press the Flash button or Options, select Hold (the callers on hold will be displayed.
Call functions 26 Telular SX7P now active. To switch back to the handset, unplug the headset from the headset jack. Note: When making a call using the Speaker button, connect the Headset after the Speaker button has been pressed and call initiated. If the Headset is already connected, the Headset audio will not be active when a call is originated in Speaker mode. II.
Basic Operations 27 Telular SX7P Basic oPERATIONS 1. Menu Structure 2. Special Features 3. Messages 4. Phonebook 5. Call History 6. Network Service 7. Profiles 8. Phone Settings 9. Organizer www.telular.
Basic Operations 28 Telular SX7P 1. SX7P Menu Structure Menu Messages Phone Book Call History Network Service Profile Phone Settings Organizer (1). Read (2). Write (3). Delete All (4). Status Report (5). Settings (6). Broadcast (7). Voice Mail (1). List (2). Add New Entry (3). Add to Entry (4). My Number (5). Copy All (6). Delete All (7). Memory Stat. (8). Select Book (9). 1 Touch Dial (1). Missed Calls (2). Answered Calls (3). Outgoing Calls (4). Call Timers (5). GPRS Info (optional) (1).
Basic Operations 29 Telular SX7P (1). Shortcuts 2. Special Features In idle Mode: Up Arrow Key: Profiles menu Down Arrow Key: Phone Book menu Left Arrow Key: Messages menu Right Arrow Key: Call History menu Center Key: FM Radio, and selects highlighted menu items (1). Shortcuts (2). Key lock and unlock (2). Key Lock and Unlock To lock the keypad: Select Menu and then press key To unlock the keypad: Select Unlock and then press key. * www.telular.
Basic Operations 30 Telular SX7P 3. Messages (1). Read (2). Write (3). Delete All (4). Status Report (5). Settings (6). Broadcast (7). Voice Mail The shortcut to Messages is the Left arrow key and the Message Button in idle mode. (1). Read (read a message) When a message is received, New Messages will be displayed on the screen, and your phone will sound the selected SMS ring tone. I. To view the message immediately, select Read II.
Basic Operations Telular SX7P iii. Send a message to the number. You can also press the Send key directly to call this number. • Call Number — Call the number that sent you this message. (2). Write (Write and send a message) I. From Menu, select Messages > Write II. Compose a message using the keypad.
Basic Operations 32 Telular SX7P • Discard — Erase the text clipboard. IV. To send the message, select Send, enter the recipient’s phone number or select Names to retrieve a number from contacts, and select Send. Note: When sending messages, your device may display the line Sending Message.This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your network operators. (3). Delete All I.
Basic Operations Telular SX7P I. From Menu, select Messages > Settings > Service Cent. II. If the box in the display is empty or contains an incorrect number, enter the number given by your network operator, and select OK. or If the box in the display contains the correct number, select OK. A message appears in the display confirming your number is saved. • Validity — To define how long the network attempts to send your messages before it gives up.
Basic Operations 34 Telular SX7P List of cell broadcast filter names and parameters set. (7). Voice Mail This option enables you to answer the voice mail. You should apply for this service from your network operator first, then you can use this function. From Menu, select Messages > Voice Mail There are two sub options of this option: I. Voice Mail: When this option is selected, your phone will directly access to the set Voice Mail Box, then you can listen to the voice messages.
Basic Operations 35 Telular SX7P You can save the phone numbers and corresponding names into the phone memory or SIM Card of your phone. Your phone memory allows you to store 500 names and phone numbers in total. The length and quantity of names and phone numbers to be stored into the SIM Card depends on the type of SIM Card provided. The shortcuts to Phone Book are: 1. Press the Down arrow key at the idle screen 2. Select Names at the idle screen (1). List — Find a name or select from a list.
Basic Operations 36 Telular SX7P • Delete — Delete a name and its associated numbers. • Ringer — Assign a specific ringer tones to the contact numbers, provided 10 user defined ringers and 9 default ring tones. (2). Add New Entry From Menu, select PhoneBook > Add New Entry. or, you can also enter new numbers at idle screen and then press Save to add it to Phone Book. Plus Dialing: This feature enables you to place an international call from most countries without entering the local international access code.
Basic Operations Telular SX7P Screen will suggest Edit or Back. Select Edit to edit the number. (5). Copy All From Menu, select PhoneBook > Copy All Select SIM to Phone to copy all entries from SIM card to the phone; or select Phone to SIM to copy all entries from the phone to the SIM card. (6). Delete All From Menu, select PhoneBook > Delete All Select SIM or Phone to delete all the entries in the SIM card or in the phone. (7). Memory Stat. From Menu, select PhoneBook > Memory Stat.
Basic Operations 38 Telular SX7P 5. Call History (1). Missed calls (2). Answered calls (3). Outgoing Calls (4). Call timer (5). GPRS info Call History stores information about the last 10 missed, 10 received, and 10 dialed calls. It also adds the total duration of all calls. When the number of calls exceeds the maximum, the most recent call replaces the oldest. For Call History to work properly: • Your network operators must support caller ID, and it must be enabled. • Your calls cannot be blocked.
Basic Operations Telular SX7P Store Number — Enter a name for the number and save it to contacts. Send message — Send a message to the number. Details — Display the date\ number and time of the call. Delete — Clear the number from memory. To clear any missed, outgoing, or answer calls from phone memory, select Call History > missed\outgoing or Answer > Delete Delete All- To clear any missed, outgoing, or answer calls from phone memory, select Call History > Missed / Outgoing or Answer > Delete all (4).
Basic Operations 40 Telular SX7P 6. Network Service (Netwrk Dependent) (1). Divert (1). Divert (2). Network Sel. (3). Call barring (4). Call waiting (5). Hide ID (6). GPRS I. Not Reachable This allows you to forward incoming calls when your phone is power off or in an area where the network is unreachable. • From Menu, select Network service > Divert > Not Reachable • Scroll to operate these options: Status, Set, Cancel II. If busy Forward all calls when you are on a call.
Basic Operations Telular SX7P • From Menu, select Network service > Divert > All Calls • Scroll to operate these options: Status, Set, Cancel V. Cancel All Cancel any call forwarding options you may have set. From Menu, select Network service > Divert > Cancel All to cancel all settings. (2). Network Sel. This option enables you to select or search your service network.
Basic Operations 42 Telular SX7P operator. From Menu, select Network service > Call Barring, the menu options are as the following: I. Outgoing — When this option is activated, you are unable to dial any number II. Intern. Calls — When this option is activated, you are unable to dial any international number. III. Intern. But Home — It allows you to make a call only to your country and dial the domestic numbers when you are roaming. IV.
Basic Operations Telular SX7P network password. (4). Call Waiting If supported by your network operators, call waiting notifies you of an incoming call even while you are in a call. You can accept, reject, or ignore the incoming call. I. Check Status You can see whether call waiting is active, and for which type of calls. From Menu, select Network service > Call Waiting > Check Status II. Activate or Deactivate From Menu, select Network service > Call Waiting > Activate or Deactivate. (5).
Basic Operations 44 Telular SX7P Attach is not selected. Detach - User can detach the GPRS service manually. SMS - User can send the SMS message over GPRS service. Auto Attach - Phone Automatically Attach/Detach GPRS service when switch on or off the phone. www.telular.
Basic Operations 45 Telular SX7P User can activate any one of the profile settings and also customize the melody and volume settings.The shortcut for Profiles is the Up arrow in idle mode. 1. Normal From Menu, select Profiles > Normal Activate - Activate the normal settings. Customize - Customize the melody and volume settings. Melody: Ringer - Enables you to set how the phone informs you of an incoming call SMS Tone - Enable you to set different SMS tones Alarm - Select an alarm tone from list.
Basic Operations 46 Telular SX7P 8. Phone Settings (1). Languages (2). Back Light (3). Call Timer (4). Dial Tone (5). Minute Minder (6). Clock (7). Security (8). AutoRedial (9). Any-key Answer (10). Screen Saver (11). Auto Keylock (12). Factory Reset (13). Service Settings (1). Languages From Menu, select Phone Settings > Languages and one of the following: • English • Spanish • French • Portuguese • Hindi (not available on all models) (2).
Basic Operations Telular SX7P The call timer is displayed once the call is connected and will increment per second. The call timer will stop when the call is ended. You can program the call timer display options set in menu. You can choose to turn the call timer On for 30 seconds, On Until Action or Off. (4).
Basic Operations 48 Telular SX7P mm/dd/yyyy. (7). Security I. FDN (Fixed Dialing Number) PhoneBook Once you set up and activate the FDN, this secondary phone book turns on to take the place of the regular Phone Book. Your phone can make calls only to those numbers that you have defined in this fixed dialing list. This option allows you to restrict your outgoing calls to a limited set of phone numbers.
Basic Operations Telular SX7P iii. At the prompt, enter the new PIN code again, and select OK. III. Change PIN2 The PIN2 code is required for features such as fixed dialing. If you enter an incorrect PIN2 code three times in succession, the PIN2 code is blocked and you will have to enter the PUK2 code. The original PIN2 code must be obtained from your network operators.
Basic Operations 50 Telular SX7P The FWP shall store that PIN and automatically enter it whenever the PIN is required so that the user does not have to enter it manually. VI. Personalization From Menu, select Phone Settings>Security>Personalization Personalization features check information stored in the FWP with that stored in the SIM. The check is performed whenever a SIM is inserted into the FWP, or the FWP is powered up with a SIM in place.
Basic Operations Telular SX7P (8). Auto Redial From Menu, select Phone Settings > Security > Auto Redial You can select On or Off. When this function is activated, your phone will automatically redial the number up to 10 times after 10 attempts the function will be terminated. (This function must be supported by your network operator). Press END key to stop auto redial. (9). Any-key Answer Any-key answer allows you to answer an incoming call by briefly pressing any key except the End key.
Basic Operations 52 Telular SX7P tings. Note: The stored phonebook information and messages will not be affected by restoring the factory settings. (13). Service Settings From Menu, select Phone Settings > Service Settings Note: Service PIN is required to access Service Settings (default 1234). I. Prefix Area Code From Menu, select Phone Settings > Service Settings > Prefix Area Code You can program a local area code into the unit.
Basic Operations Telular SX7P From Menu, select Phone Settings > Service Settings > Dial Delay. After last digit dialing, phone will wiat for a period of time ( 1 to 10 seconds) and then automatically dial the number entered. The default value set to 3 seconds. IV. Dialtone After Discon. From Menu, select Phone Settings > Service Settings > Dialtone After Disconnect. Select On to activate and Off to deactive the option.
Basic Operations 54 Telular SX7P You can select On to activate and Off to deactivate the service PIN via menu item, also change the password for PIN. If Service PIN is active, user has to provide this PIN before entering into service setting options. VII. Auto Call Discon. From Menu, select Phone Settings > Service Settings > Auto Call Disconnection This is a feature that automatically disconnects a call after a user programmable time. You can program the call disconnect time range between 1 to 99 minutes.
Basic Operations 55 Telular SX7P (1). Alarm The Phone allows you to set an alarm clock that can be used on time or every day. I. Alarm From Menu, select Organizer > Alarm > Alarm Enter alarm time and choose frequency, Once, or Daily. II. Cancel Alarm From Menu, select Organizer > Alarm > Cancel Alarm to deactivate the alarm selection. (2). Power On The Power On feature will turn the phone on at the set time. I. From Menu, select Organizer > Power On Choose ON and set put ON time , and press OK key. II.
Basic Operations 56 Telular SX7P The calculator adds, subtracts, multiplies, divides digits. Note: This calculator has limited accuracy and is designed for simple calculations. I. From Menu, select Organizer > Calculator II. In the calculator screen, enter the first number in the calculation. Press the # key for a decimal point if necessary. III. To perform an arithmetic calculation, select Options to cycle through Equals, Plus, Minus, Divide By, Multiple By. IV.
Basic Operations Telular SX7P You can play the FM radio using the phone at selected preset channel. Play - Start the FM Radio at selected preset channel. Preset Channels User can store the 9 station presets. Select and Play - You can set 9 pre defined channels using Select and Play option. Edit - Edit the preset channel frequency. Delete - Delete the stored preset channel. FM Setting User can select/change the band and sensitivity. FM Band - You can choose any one of the band either US or Euro band.
sPECIFICATIONS 58 Telular SX7P sPECIFICATIONS Air Interface Standard GSM Phase 2+ Transmit Power GSM 850/900: 2 watts DSM 1800/1900: 1 watt Frequency Ranges GSM 850 GSM 900 GSM 1800 GSM 1900 FWP Dimensions and Weight Metric: 175mm (W) x 170mm (L) x 96mm (H) Weight: 176g Environmental Operating temperature range: -20º C (-4º F) to +60º C (122º F) Storage temperature range: -40º C (-40º F) to +80º C (176º F) Humidity: Up to 95% relative humidity (non-condensing) Connectors 2.
sPECIFICATIONS Telular SX7P Antenna High performance internal antenna AC-to-DC Charger (Included) Voltage:Input: 90 - 240 V. Outpu: 5.25 V. Frequency: 50/60 Hz Internal Battery Backup 3.6v rechargeable NIMH Talk time: More than 4 hours. Standby time: up to 14 days. Both depend on network conditions. *SX7P-300G series only www.telular.
Warranty Statement 60 Telular SX7P Warranty statement Limited Commercial Warranty I.
Warranty Statement Telular SX7P EXTENDED BY TELULAR TO BUYER ONLYAND NOT TO BUYER’S CUSTOMERS OR USERS OF BUYER’S PRODUCTS. II. HOW TO OBTAIN WARRANTY SERVICE: In order to obtain warranty service, return the product covered under this warranty to a Telular authorized repair center , distributor, agent or dealer, III. WARRANTYCONDITIONS: This is the complete warranty for the Products manufactured by Telular and sold to Buyer.
Warranty Statement 62 Telular SX7P HONOR NO WARRANTY CLAIM WHERE THE PRODUCT IS USED IN SUCH A COMBINATION AND IT IS DETERMINED BY TELULAR THAT THERE IS NO FAULT WITH THE PRODUCT. TELULAR DISCLAIMS LIABILITY FOR RANGE, COVERAGE, AVAILABILITY, OR OPERATION OF THE CELLULAR SYSTEM WHICH IS PROVIDED BY THE CARRIER. IV. WHAT THIS WARRANTY DOES NOT COVER: (a) Subsequent upgrades and enhancements to the Product.
Warranty Statement Telular SX7P RANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, INFRINGEMENT, DELIVERY, NEGLIGENCE AND PERSONAL INJURY, ARE DISCLAIMED. FURTHER, AS THE CELLULAR CARRIER IS NOT CONTROLLED BY TELULAR, NO WARRANTYIS MADE AS TO COVERAGE, AVAILABILITY OR GRADE OF SERVICE PROVIDED BY THE CELLULAR CARRIER.
Telular SX7P Conformance Statement: Hereby, Telular Corporation declares that the SX7P 900/1800 MHZ (Dual Band) models are in compliance with the essential requirement and other relevant provisions of Directive 1999/5/EC. FCC Hereby, Telular Corporation declares that the SX7P-200G 850/1900 MHZ (Dual Band) model is in conformance with all applicable FCC requirements. www.telular.
