User Manual
To Adjust Phone Alert Volume (ringer)
1) Press the MENU key,
2) Select Settings, then Audio Settings.
3) Select Alert Volume and set desired volume level.
NOTE: If you choose “Silent”, no alert will sound.
To Change Alert Tones
You can set different alerts for different types of calls. This allows
you to tell the difference between a voice call or an SMS mes-
sage, for example, by the alert that sounds.
1) Press the MENU key
2) Select Settings, then Audio Settings.
3) Use the arrow keys to scroll through the alert types.
4) Select the alert you would like to change.
5). Select the alert sound you would like to use.
To Use the Speaker Phone
1) Press the Speaker key.
You will hear the dial tone through the speaker, and the
Speaker icon will display.
2) Enter the telephone number.
Internal Phone Book
Your SX5D has an “Internal Phone Book” in which you can store up to 99 telephone numbers
with corresponding names. You can set them up for convenient one-touch or two-touch dialing.
To Change Phone Book Settings
You can save entries to the SIM card or to the phone memory. If
you save to the SIM card, you can transfer that SIM card to anoth-
er phone and keep all your phone book entries. You also have the
option of selecting to choose where to save each entry as you
enter it.
1) Press the MENU key.
2) Select Phonebook, then Settings
3) Scroll to and select Save Entries To.
When you scroll to Save Entries To, the current setting will display.
4) Select where you would like to save phone book entries.
To Use Keypad Buttons
There are three or four letters assigned to each number on the telephone keypad. The letters
on the keypad will display when you press the appropriate number. If you press the number 3,
for example, a “D” will appear. If you press it twice, you will see the “E”, and if you press it
three times, the “F” will appear. The cusor will move on to the next space after a brief pause,
so you must select the letter quickly.
To Enter a Hard Pause
Hard pauses allow the SX5D to be used with a automated phone systems used for pagers or
automated banking. When you program a number into the phonebook, you can enter a pause
by pressing and holding “#” for more than one second. The hard pause will be displayed as “P.”
NOTE: This feature can only be used for phonebook entries.
Phonecell
®
SX5D 17 Technical Manual
Phonebook Settings
Speakerphone off-hook
Changing Alert Tones