User Manual
Phonecell
®
SX5D 14 Technical Manual
Service Indication
Full Service
When the power cord is connected properly, the SX5D will display
the Telular logo, emit a power on tone, and the LED will light up.
After a few seconds the greeting and mobile number will display. If
you have service, the antenna icon will display indicator lines to
show the signal strength.
No Service
When there is no service in your area, the antenna icon will have
no indicator lines. Contact your service provider to make sure cel-
lular service is activated. No calls can be made in this case.
Limited Service
If there is a signal, but full service with the system is blocked, only
emergency calls will be allowed. Contact your service provider for
more information.
Network Settings
Network Registration
If the home network is unavailable, but there is another network available (either another fre-
quency or system), then the SX5D will prompt to register to that system. If there is more than
one system, a list of available systems will display.
1) Use the arrow keys to highlight a network from the list.
2) Press SELECT. If the selected network cannot be accessed, the list of available networks will
be updated and you will have to select a different one.
Network Selection
1) Press MENU
2) Select Settings, then select Network Settings.
3) Select Select Network.
4) To use Automatic network selection, select Automatic.
To use Manual network selection, select Manual and continue
with Step 5.
5) Select a network from the list.
Preferred Networks
To Insert New Entry
1) Press MENU
2) Select Settings, then select Network Settings.
3) Select Select Network.
4) Select Set Preferred.
4) Highlight the entry above which you want to insert a
new preferred carrier.
5) Press SELECT.
6) Select Insert.
7) Select an entry from the list.
To Delete Entry
1) Press MENU
2) Select Settings, then select Network Settings.
3) Select Select Network.
4) Select Set Preferred.
5) Select the entry you want to delete.
6) Select Delete
No Service
Full Service
New entry will
be inserted
here