User's Manual

DATA SETTINGS
Data Port Type
1. Start by pressing MENU.
2. Select 6: Data Settings.
3. Select 1: Data Port Type.
4. Select the data cable being used and press STO to save.
1. USB
2. RS232
Baud Rate
Set the baud rate appropriate for the application. PC fax uses 19,200. For 1X data, use
115,200.
1. Start by pressing MENU.
2. Select 6: Data Settings.
3. Select 2: Baud Rate.
4. Select the desired baud rate and press STO to save.
Selftest cycle
The unit will perform a periodic self-test to ensure the proper operation of the phone. The
default setting is 180 minutes (3 hours).
1. Start by pressing MENU.
2. Select 6: Data Settings.
3. Select 3: Selftest cycle
4. Select between 0 and 65535 minutes and press STO to save.
RX Data Mode
To receive data, you must set the RX data mode setting.
1. Start by pressing MENU.
2. Select 6: Data Settings.
3. Select 4: RX Data Mode.
4. Select the desired setting and press STO to save.
User Defaults
This setting is used to reset the user defaults.
1. Start by pressing MENU.
2. Select 6: Data Settings.
3. Select 5: User Defaults
4. Select RESET and press STO to save.
Phonecell
®
SX5 CDMA 17 User Manual