User's Manual

Phonecell SX4P TDMA 800 7 User Manual
PHONECELL SX4P POWER-UP SEQUENCE
When the SX4P is powered on, the unit automatically proceeds through a power-up sequence in which
the SX4P displays all LCD fields, the Mobile Identification Number, the software version and radio version.
NOTE: When the AC/Battery switch is changed, the Power-Up Sequence will begin.
PHONECELL SX4P NORMAL MODE
The SX4P operates in the Normal Mode. The functions of the Phonecell SX4P are displayed on the
LCD - see Figure 10.
Dialed Digits (Middle Row)
Outgoing Calls
When you make an outgoing call (the handset is off-hook), the numeric digits entered are dis-
played on the LCD Display - see Figure 10.
• The star/asterisk (*) key displays "–."
• The pound/hash (#) key displays "
≡≡
."
NOTE: When the handset is on-hook and keys are pressed, numeric digits are displayed only when the
SX4P is in the programming mode. Dialed digits move from right-to-left as they are entered. The dialed
digit row is completely cleared when the handset goes on-hook in the Normal Mode.
Incoming Calls
When the SX4P receives an incoming call, the Dialed Digits row displays the incoming call number
(Caller ID) when the on-hook call alert sounds. The incoming call number display is turned off when
the call is answered (handset is off-hook). Caller ID will also be shown for off-hook call alerts.
NOTE: The incoming call number (Caller ID) feature requires that Caller ID is provided by the cellu-
lar network. If the service is not provided, or the caller ID is blocked or unknown, the display remains
blank on incoming calls.
OPERATION
Phonecell SX4P Controls
Front Panel
All controls for the SX4P are located on the front
panel - see Figure 11. Pressing any of the front panel
controls will cause the unit to beep for approximately
100 milliseconds when the key is depressed.
Keypad
The keypad includes all digits 0 through 9 and spe-
cial characters hash/pound (#) and star/asterisk (*).
All data entry and programming activities are per-
formed using the keypad.
Flash Key
The flash key produces a hookflash. When you initi-
ate the Hookflash function, it automatically lets you:
• Speed up the connection after you dial a phone
number.
• Answer an incoming call that occurs when you’re
dialing a phone number.
Redial/Speakerphone Key
The Redial/Speakerphone Key provides redial capability and Speakerphone operation.
1) Pick up the handset or press the Redial/Speakerphone key. The SX4P is now “off-hook”
2) A long press of the Redial/Speakerphone key will redial the last number dialed.
Switching Between the Speakerphone and Handset
The SX4P allows use of either the Speakerphone or Handset while in an active call.
1) While the call is active, to disable the speaker and activate the handset, just pick up the
handset from the cradle. The speakerphone is now inactive. To activate the speakerphone while
using the handset just press the Redial/Speakerphone key. The speakerphone function is now
Figure 11 – SX4P front panel.
Volume
Up/Down
keys
Flash
Key
Voicemail
Retrieval
Key
Redial/
Speaker-
phone
Key