Installation Instructions

RF Unit USER AND
INSTALLATION
MANUAL
Code: D168X01_DDS09
Date: 16/06/09 Page: 9 of 16
01.01.00/1 Rev.1
5.3. MODULES
1.- RPS (REPEATER POWER SUPPLY)
LEDs to indicate module status.
LED TYPE NORMAL
STATUS
FUNCTIÓN
SUPPLY Green On There are 26.4V at the RPS
input
26.4V Green On There are 26.4V at the RPS
output
13.2V Green On There are 13.2V at the RPS
output
Power Supply switch (Ref. 7): ON/OFF switch to connect to and disconnect from the
RF Unit
2.- RPA P25 (REPEATER POWER AMPLIFIER)
LEDs to indicate module status.
LED TYPE NORMAL
STATUS
FUNCTIÓN
ON Green On Power supply correct
TX POWER Green On Module transmitting
3.- RTX P25 (REPEATER TRANSMITTER)
LEDs to indicate module status.
LED TYPE NORMAL
STATUS
FUNCTIÓN
ON Green On Power supply correct
REF. ERROR Red Off Failure in the 10 MHz reference
INT. ERROR Red Off Internal failure
BUS ERROR Red Off Communication failure with the
RCPU P25 module
RPA ERROR Red Off RPA P25 failure
RPW ERROR Red Off Reflected power failure