Installation Instructions

RF Unit USER AND
INSTALLATION
MANUAL
Code: D168X01_DDS09
Date: 16/06/09 Page: 4 of 16
01.01.00/1 Rev.1
1. INTRODUCTION
The RF Unit is the RF transceiver of Teltronic P25 systems, with a transmitter
output power of 100W. Therefore, this is a mandatory module in the infrastructure P25
network. It is manufactured following a robust mechanical modular design which allows
simple and economic maintenance.
The RF Unit is available in the following frequency bands:
 380 - 400 MHz
 410 - 430 MHz
 450 - 470 MHz
 764 - 806 MHz
 806 - 870 MHz
The modules that form the RF Unit are:
 RPS (Repeater Power Supply P25)
 RPA P25 (Repeater Power Amplifier P25)
 RTX P25 (Repeater Transmitter P25)
 RRX P25(Repeater Receiver P25)
 BSYNC (RF Unit Synchronism) - OPTIONAL
 RCPU P25(Repeater Control Processing Unit P25)
The proper operation of any electronic device depends on its correct use. It is
therefore recommended to follow the instructions in this manual.
!
CAUTION: Switch the RF Unit off before inserting/removing any of its modules.