User's Manual

Code: D148X01PT_DDS06
MBS USER AND
INSTALLATION
MANUAL
Date: 19-Dec-2012 Page: 11 of 36
01.01.00/1 Rev.1
6.1. NECESSARY EQUIPMENT
Make sure you have the necessary equipment depending on the
configuration to install. If any of the elements necessary to carry out the
installation process described in this manual, were lost or damaged, contact
your supplier and / or installer.
Necessary equipment
Element Code Comments
MBS Unit D148x01
“x” varies depending on band.
Each MBS Unit includes:
- MBS Unit equipment
- Power supply cable connector
- Ethernet cable connector
- RF superflexible wire N-Male ↔ N-Male
- Brackets for installation
Anti-vandal kit D014000
It is only necessary if anti-vandal protection is
required
Ethernet cable connector 225120
Every MBS Unit includes one connector of this
type; if a MBS Unit must be connected to two
radio links, it is necessary to have a second
unit.
RF superflexible wire N-Male
↔ N-Male
208931
Each MBS Unit includes one cable of this type;
if a MBS Unit requires diversity 2 on reception it
is necessary to have a second unit.
Additional carrier
interconnection kit
D014001
It is mandatory in case of connecting a second
MBS Unit to the first MBS Unit.