User's Manual

MBS USER AND
INSTALLATION
MANUAL
Code: D148X01PT_DDS06
Date: 14-Nov-2014 Page: 13 of 41
01.01.00/1 Rev.1
Note: POWER_IN and POWER_OUT connectors have a coding key to avoid wrong
connections; on the following table is showed the location of this coding key depending on
the MBS Unit power supply option.
External view of power supply panel connector
AC Power Supply DC Power Supply
Note: The amount of power delivered by both PoE and PoE/ETH connectors to the radio
links can not exceed 35 W in total.
5.3.VISUAL INDICATORS
A MBS Unit has a LED indicator that, depending on its state, will indicate the function of the MBS Unit
The LEDs show the MBS Unit state:
LED
TYPE
NORMAL STATE
FUNC
T
IÓN
STATE Tricolor Green ON / Orange ON
·
Green On: MBS Unit is operating and
transmitting.
· Green flashing: MBS Unit initializing
· Red On: There is no link with CNC and no
control from any LSC.
· Red flashing: When MBS Unit is
controlled by the CNC, showing any kind
of alarm other than the communication one
is NOT OK.
· Orange On: MBS Unit is operating and
transmitting in fallback mode.
· Orange flashing: When MBS Unit is in
fallback mode, showing any kind of alarm
other than the communication one is NOT
OK.
· OFF: The equipment is either without
power source or is damaged.