User's Manual

User Manual
30
en
8.3 Status messages
The MDT-400 / DT-410 allows you to send status messages to individual and group
addresses: “Call Back”, “Urgent request” and “Emergency”. These are standard messages
that can be enabled or not by programming
It is also possible to send messages predefined by the user by programming. They are
messages whose number code and associated text are defined by the user.
In the Messages submenu of the Main Menu, select the option “Status”.
You can send status messages to individual addresses (TETRA private addresses or
telephone addresses) or group addresses stored in the phone book, or directly dial the
individual destination address.
Once the destination has been selected, press soft key ‘Send’.
When the message is received in the infrastructure, this will send a confirmation “Message
sent” or inform of “Failed sending” to the equipment.
To send a status message rapidly to a predefined address (individual or group) press
+ + Digit 1 + Digit 2. This option must be enabled by programming.
The message number is indicated with
digit 1 and digit 2 and it corresponds to the position
occupied by the message in the list. This can be consulted to know the place each one
occupies (Messages Menu in the Main Menu).
When a new status message is received, the equipment informs the user by means of an
information screen that a message has been received and the symbol is displayed.
To read old status messages, select Status from the Messages submenu of the Main Menu,
which contains the following options: Read, Send and Delete status.
F
*