User's Manual

User Guide
- 35 -
en
- Press the PTT button and speak into the microphone. When you wish to stop speaking,
release the button.
- The other person can then do the same; pressing the PTT button and speaking.
- Either of the two users may disconnect the call by pressing the red hang-up key
.
- Instead of making a direct call, you can make a call so that the called user must hang up
first. To do this, start the call with the programmable keys in which you have programmed
this function, for example, with one of the auxiliary buttons.
To make a private duplex call:
- Enter the number of the person you wish to call or select it from the contacts list.
- With the Mode soft-key select the type of call you wish to make. Next to the number you
have dialled, you will see the
symbol, which indicates that it is a private TETRA call.
- Press the green call key
.
- During connection you will hear a ringing tone. Wait for the user that you have called to
answer. Then you can start to speak without the need for pressing the PTT button.
- Either of the 2 users may disconnect the call by pressing the red hang-up key
.
- If you wish to make a telephone-type call, when dialling the number, use the Mode soft-
key to select the icon
. For telephone switching calls (PABX), select the mode .
To receive an individual call, press the PTT button or the green call key . On the display,
you can see the type of call and the number of the calling user, or the name, if it is stored in
the contacts list.