User's Manual

Talkgroup Selection box. The selected talkgroup (appears in bold typeface)
and the selected folder are displayed within a selection box. Only those
talkgroups that are selectable within the selected folder appear in the
selection box and you can scroll through the talkgroups using the Navi-
knob. An icon appears to the left of a TMO talkgroup, indicating the
scanning priority and whether or not the talkgroup is scan-enabled. You
can select another folder by scrolling through the folders at the same level
as the current folder or those at a higher level or sub-folders within the
hierarchy.
Note: Only those talkgroups and folders that are selectable appear in the
Talkgroup Selection box. Non-selectable folders and talkgroups, such as
the Always Attached and the Background folders, do not appear for
selection. The exception is the DGNA folder where a talkgroup from the
folder can be selected, but the selected folder remains unchanged.
All the TMO talkgroups within the selected folder that are scan-enabled
1
and
valid for the current network contribute to the scan list that the radio uses to
prioritise calls. If a talkgroup is editable
2
you can change its scan state (to
enable or disable scanning), change its scanning priority (see Scanning
talkgroups on page62) and select or deselect it.
A talkgroup can be copied from a folder to another editable folder
3
, for
example you can copy talkgroups from Special folders such as the Always
Attached folder into a generic folder and copy frequently used talkgroups to
the Favourites folder, making it quicker and easier to change your talkgroup.
Your radio may be customised for Quick Folders, which allow you to quickly
change to a frequently used folder using a soft key.
Opening the current folder
Use one of the following methods to open the current folder:
From the Home screen, press Groups and depending on the customisation
of your radio, either the current selected folder opens displaying all
1
In Radio Manager folder properties, the talkgroup option In Scan List is selected.
2
In Radio Manager folder properties, the talkgroup option Editable is selected.
3
In Radio Manager folder properties, the Subject Content option is set to Edit.
58
HTT-500-2 – 04/2017