User's Manual

using the selected profile.
If an accessory is removed and then an accessory of the same type is attached
before power on, that has a different accessory profile, you must detach the
accessory and re-attach the accessory to open the Accessory Profile screen.
You can then select a profile for the accessory.
Belt clip
The belt clip is used to attach your radio to clothing or to a belt. The clip is
fitted to the carrying aid attachment recess on the back of your radio.
Caution: Damage to product. Always remove the battery before fitting or
removing the clip.
Fit the belt clip
1. Remove the battery.
2. Slide the stud into the carrying aid attachment recess.
3. Slide until it clicks into place.
Remove the belt clip
1. Remove the battery.
2. Lift the clip.
148
HTT-500-2 – 04/2017