TSW101 Quick Start Guide v1.2 https://wiki.teltonika-networks.
FRONT VIEW Power socket Ethernet port PoE OUT 1 Power LED 2 3 5 PoE powered Ethernet ports BACK VIEW Grounding screw 4
POWER SOCKET PINOUT RJ45 LED MEANING TECHNICAL INFORMATION Technical specifications Input voltage range 9 – 30 VDC Max power consumption no PoE devices connected <2.2 W Max PoE power budget at PSE* 60 W Max Ethernet cable length 100 m * Depends on connected power source.(30 W (max.) @ 12 VDC for total PD consumption; 30 W (max.) for each PoE port ; 60 W (max.) @ 24 VDC for total PD consumption; 30 W (max.) for each PoE port).
HARDWARE INSTALLATION 1. Connect your main internet router/modem to TSW101 LAN port number 5. 2. Connect end devices (ex. IP camera) to TSW101 1 to 4 port, which you want to power via Ethernet. 3. Connect 2-pin power plug to TSW101 to power up switch.
SAFETY INFORMATION TSW101 switch must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments. [BG] Bulgarian С настоящето, TELTONIKA NETWORKS декларира, че TSW101 е в съответствие със съществените изисквания и другитеприложими разпоредби на Директива 2014/30/EU и 2014/35/EU.
[BG] Инструкция: Свържете адаптера на захранване, за да включите устройството. Повече информация в https://wiki.teltonika-networks.com/ [HR] Upute za uporabu: Priključite napajanje. Više informacija na https://wiki.teltonika-networks.com [CZ] Návod k použití: Připojte napájecí adaptér k zapnutí přístroje. Více informací najdete v https://wiki.teltonika-networks.com/ [DK] Instruktionsbog: Tilslut strømadapteren for at tænde for enheden. Mere information i https://wiki.teltonika-networks.
