TRB140 Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.
DATASHEET // TRB140 HARDWARE FRONT VIEW Power socket Ethernet port Power LED BACK VIEW Mobile network type LEDs USB port Reset button Mobile antenna connector Mobile signal strength indication LEDs POWER SOCKET PINOUT Power / Red wire I/O / Green wire Ground / Black wire I/O / White wire Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.
DATASHEET // TRB140 FEATURES MOBILE Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps Status Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID.
DATASHEET // TRB140 MODBUS TCP SLAVE ID filtering Respond to one ID in range [1;255] or any Allow remote access Allow access through WAN Custom registers MODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality MODBUS TCP MASTER Supported functions 01, 02, 03, 04, 05, 06, 15, 16 Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little
DATASHEET // TRB140 INPUT/OUTPUT Configurable I/O 2 x Configurable Inputs/Outputs. Digital input 0 - 6 V detected as logic low, 8 - 30 V detected as logic high.
DATASHEET // TRB140 HARDWARE INSTALLATION 1. Unscrew two back panel hex bolts and remove the back panel. 2. Insert your SIM card into the SIM socket. 3. Attach the panel and tighten the hex bolts. 4. Attach the mobile antenna (max torque 0.4 N·m / 3.5 lbf·in) and connect the USB cable. LOGIN TO DEVICE 1. Power on the device and connect the USB cable to your computer. 2. Allow the gateway to boot up. This might take up to 30 seconds. 3.
DATASHEET // TRB140 WHAT'S IN THE BOX? STANDARD PACKAGE CONTAINS* • TRB140 • 4.5 W PSU • 1 x LTE antenna (magnetic mount, SMA male, 3 m cable) • Micro-USB cable (0.8 m) • 1 x hex key • LAN cable • QSG (Quick Start Guide) • RMS Flyer • Packaging box TRB140 4.5 W PSU 1 X LTE ANTENNA (MAGNETIC MOUNT, SMA MALE, 3 M CABLE) MICRO-USB CABLE (0.8 M) 1 X HEX KEY ETHERNET CABLE (1.5 M) * For all standard order codes standard package contents are the same, execpt for PSU. Copyright © 2021, TELTONIKA NETWORKS.
DATASHEET // TRB140 STANDARD ORDER CODES PRODUCT CODE HS CODE HTS CODE PACKAGE CONTAINS TRB140 003000 851762 8517.62.00 Standard Package For more information on all available packaging options – please contact us directly.
DATASHEET // TRB140 MOUNTING OPTIONS DIN RAIL KIT Parameter Value Mounting standard 35mm DIN Rail Material Low carbon steel Weight 57g Screws included Philips Pan Head screw #6-32×3/16, 2pcs Dimensions 82 mm x 46 mm x 20 mm RoHS Compliant V DIN RAIL KIT DIN Rail adapter Philips Pan Head screw #6-32×3/16, 2pcs for RUT2xx/RUT9xx ORDER CODE HS CODE HTS CODE PR5MEC00 73269098 7326.90.98 For more information on all available packaging options – please contact us directly.
DATASHEET // TRB140 TRB140 SPATIAL MEASUREMENTS & WEIGHT MAIN MEASUREMENTS W x H x D dimensions for TRB140 Device housing*: 74.5 x 25 x 64.4 Box: 173 x 71 x 148 *Housing measurements are presented without antenna connectors and screws; for measurements of other device elements look to the sections below.
DATASHEET // TRB140 FRONT VIEW The figure below depicts the measurements of TRB140 and its components as seen from the front: REAR VIEW The figure below depicts the measurements of TRB140 and its components as seen from the back: Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.
DATASHEET // TRB140 MOUNTING SPACE REQUIREMENTS The figure below depicts an approximation of the device's dimensions when cables and antennas are attached: Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.
DATASHEET // TRB140 DIN RAIL The scheme below depicts protrusion measurements of an attached DIN Rail: Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.
