User Guide

8
FMC130 | Wiki
Configuration process begins by pressing on connected device
(Figure 9 Device connected via USB).
After connection to Configurator Status window will be displayed
(Figure 10 Configurator Status window).
Various Status window tabs display information about GNSS, GSM,
I/O, Maintenance and etc. FMC130 has one user editable profile,
which can be loaded and saved to the device. After any modification
of configuration, the changes need to be saved to device using Save
to device button. Main buttons offer following functionality:
1.
Load from device – loads configuration from device.
2.
Save to device – saves configuration to device.
3. Load from file – loads configuration from file.
4. Save to file – saves configuration to file.
5.
Update firmware – updates firmware on device.
6. Read records – reads records from the device.
7.
Reboot device – restarts device.
8. Reset configuration – sets device configuration to
default.
Most important configurator section is
GPRS – where all your server
and GPRS settings can be configured and Data Acquisition – where
data acquiring parameters can be configured.
More details about FMC130 configuration using Configurator can be
found in our
Wiki.
Figure 9 Device connected via USB
Figure 8 Language selection
Figure 10 Configurator Status window