User Guide

6
FMC130 | Wiki
Set up your device
How to insert Micro-SIM card and
connect the battery
1. Gently remove FMC130
bottom cover using plastic pry tool from
both sides. Then remove the top cover.
2. Insert Micro-SIM card as shown with PIN request disabled or
read our
Wiki how to enter it later in Teltonika Configurator.
Make sure that Micro-SIM card cut-off corner is pointing forward
to slot.
3. Connect battery as shown to device. Position the battery in place
where it does not obstruct other components.
4. After
configuration, see “PC Connection (Windows)”, attach
device top and bottom cover back.
Figure 4 Covers removal Figure 5 Micro-SIM card insert Figure 6 Battery connection Figure 7 Cover removal