User Guide

15
FMC130 | Wiki
Safety information
This message contains information on how to operate FMC130 safely. By
following these requirements and recommendations, you will avoid
dangerous situations. You must read these instructions carefully and
follow them strictly before operating the device!
• The device uses SELV limited power source. The nominal voltage is +12
V DC. The allowed voltage range is +10..+30 V DC.
• To avoid mechanical damage, it is advised to transport the device in an
impact-proof package. Before usage, the device should be placed so
that its LED indicators are visible. They show the status of device
operation.
• When connecting the 2x6 connector wires to the vehicle, the
appropriate jumpers of the vehicle power supply should be
disconnected.
• Before unmounting the device from the vehicle, the 2x6 connector
must be disconnected. The device is designed to be mounted in a zone
of limited access, which is inaccessible to the operator. All related
devices must meet the requirements of EN 62368-1 standard.
The device FMC130 is not designed as a navigational device for boats.
Do not disassemble the device. If the device is damaged,
the power supply cables are not isolated or the isolation is
damaged, DO NOT touch the device before unplugging the
power supply.
All wireless data transferring devices produce interference
that may affect other devices which are placed nearby.
The device must be connected only by qualified personnel.
The device must be firmly fastened in a predefined location.
The programming must be performed using a PC with
autonomic power supply.
Installation and/or handling during a lightning storm is
prohibited.
The device is susceptible to water and humidity.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Battery should not be disposed of with general household
waste. Bring damaged or worn-out batteries to your local
recycling center or dispose them to battery recycle bin
found in stores.