User's Manual

FREQUENCY CHART
Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz)
1 462.5625 6 462.6875 11 467.6375
2 462.5875 7 462.7125 12 467.6625
3 462.6125 8 467.5625 13 467.6875
4 462.6375 9 467.5875 14 467.7125
5 462.6625 10 467.6125
TONE SELECT
After press the MENU key twice and press the UP/DOWN key to select the desired Tone.
Press the UP/DOWN key to return to the Repeat Mode for more than (0.2) seconds.
At press and hold the UP/DOWN key, channel will be changed automatically and will check the
Channel Busy. To select a channel and return to receive / stand-by mode press MENU, PTT, CALL
or MONITOR key and no key entries for (4) seconds.
At power On/Off, the selected tone will not be changed.
CTCSS TONE NUMBER & FREQUENCY
No. Freq.(Hz) No. Freq.(Hz) No. Freq.(Hz) No. Freq.(Hz)
1 67 11 97.4 21 136.5 31 192.8
2 71.9 12 100 22 141.3 32 203.5
3 74.4 13 103.5 23 146.2 33 210.7
4 77 14 107.2 24 151.4 34 218.1
5 79.7 15 110.9 25 156.7 35 225.7
6 82.5 16 114.8 26 162.2 36 233.6
7 85.4 17 118.8 27 167.9 37 241.8
8 88.5 18 123 28 173.8 38 250.3
9 91.5 19 127.3 29 179.9
10 94.8 20 131.8 30 186.2
VOLUME CONTROL
Press the UP/DOWN key to increase(to decrease) the volume level from 1 to 32(from 32 to 1)
Press the UP/DOWN key to return to Repeat Mode for more than (0.2) seconds.
When power On/Off, the volume level will be not changed.
The volume level will be changed to original level during replacing a battery.
MONITOR KEY
1. Monitor On/Off
2. Continuous Monitor Mode On/Off
l_ Normal Monitor Mode
During pressing the Monitor key, Audio is On and RX Icon appears on the LCD.
Release the key to return to Stand-by Mode and Audio will be muted
l_ Continuous Monitor Mode
Press the Monitor key for more than (3) seconds, Monitor Mode will be operated
with Single Beep (RX Icon appears on the LCD)
BACK LIGHT ON/OFF
When any key is pressed, the LCD will be illuminated.
The lamp will be out after (5) seconds.
BATTERY SAVER
After (4) seconds elapse with no key entries, no call received, and no transmission, Battery Saver
automatically functions. It repeats switching ON and OFF the power to the receiver at certain ratios
to maximize battery life. You cannot switch OFF this function.
SPECIFICATIONS
Frequency range 462.5625 – 467.125 MHz (14 Channels)
Supply voltage (rated voltage) 6.0 V
Transmit output power 500mW
Dimensions (W x H D, projection not included) 00.0 X 000.0 x 00.0 mm
(0.00 x 0.00 x 0.00 inches)
Weight (with 4 AAA batteries) Approx. 000g (0.0 oz.)
WEATHER FUNCTION
With press the Menu key to appear the Weather Icon on the LCD as blinking with BEEP1 for (0.5)
seconds and press the Up/Down key to appear the Weather Channel.
Press the Up/Down key to select the desired Channel at the Channel is blinking. Press the PTT,
Monitor, Call, Menu key as well as do not press any key for (4) seconds.
The Weather Function will be over.
PTT and Call will be not operated at the Weather Stand-by Mode.
With press the Menu key to blink the Weather Icon and press the Up key for (0.5) seconds to return
to FRS mode.
WEATHER CHANNEL LIST
Channel Frequency Channel Frequency
1 162.550 MHz 6 162.500 MHz
2 162.400 MHz 7 162.525 MHz
3 162.475 MHz 8 161.650 MHz
4 162.425 MHz 9 161.775 MHz
5 162.450 MHz 10 163.275 MHz