User's Manual

Bellsouth feature list

Tone select

Press the Menu button two times. The tone digits are blinking and then press up and down

key to a wanted tone. The release of tone selecting mode is to press one of following.

Menu, 2. PTT, 3. Call, 4. Time out (after 4sec ), 5.Lamp/Key Lock. It returns to stand-by

condition.

When the radio is power off and on again , the selected tone is recalled. If press and hold

Up/Down key for 200msec, tone changes upward or downward repeatedly.

Volume control

The volume of radio is controlled by Up/Down button on normal mode

The Up button increases the volume from level 1 to level 16, and Down button decreases

from level 16 to level 1. Other functions of the volume button is following.

Pressing the Up/Down button for 200msec more, it operates as Repeat mode.

The volume level is recalled even after replacing battery of power off.

VOX function

The function is replacing for PTT key to transmit by the voice signal through Mic

Press the menu button three times. The VOX icon is blinking on LCD.and then OFF digits

appears.

Press the Up/Down button to control the VOX level from off to 3. VOX OFF means VOX

release

Press the Menu key to set the VOX , and then VOX icon appears on LCD.

If press and hold Up/Down button for 1sec more, it operates as Repeat mode

The VOX mode is recalled even after replacing battery of power off.

The release of VOX is to press the Menu Key for above 2 sec

Monitor/Light Key function

The Monitor Key operates as followings

turns the monitor On/Off

continuous monitor mode on

Normal Monitor Mode

Pressing Monitor key, the channel status is checked and audio is always open whether

existence of carrier or not. To release the Key, audio is muted and it turns to stand-by mode.

Continuous Monitor Mode.

Pressing Monitor Button for 3 sec, the set begins to be continuous monitor mode with Single

Beep

Pressing Monitor Button again or call/PTT key to release continuous monitor mode.