User Guide

Phone: [phone] Fax: [phone]
[e-mail] www.telran.co.il Technical support *2023
LED indicator
LED
Color
Function
PWR
Orange
Off: No Power supply.
Light: Indicates the switch has power.
DATA
Green
Off: No device is connected to the corresponding port.
Light: Indicates the link through that port is successfully established
at 10/100Mbps.
Blink: Indicates that the Switch is actively sending or receiving data
over that port.
PoE
Orange
Off: No PoE powered device (PD) connected.
Light: There is a PoE PD connected to be port, which supply power
successfully.
Blink: Indicates port abnormal power supply.
Rear Panel
The rear panel of 4+2 100Mbps indicates AC inlet power socket.
Installation the Switch
This part describes how to install your Ethernet Switch and make connections to it.
Please follow the following instructions in avoid of incorrect installation causing device
damage and security threat.
 Before cleaning the switch, unplug the power plug of the switch first. Do not clean
the switch with wet cloth or liquid;
 Do not place the switch near water or any damp area. Prevent water or moisture
from entering the switch chassis;
 Do not place the switch on an unstable case or desk. The switch might be
damaged severely in case of a fall;
 Ensure proper ventilation of the equipment room and keep the ventilation vents of
the switch free of obstruction;
 Make sure that the operating voltage is the same one labeled on the switch;
Do not open the chassis while the switch is operating or when electrical hazards are
present to avoid electrical shocks.