User's Manual

Telrad AOL-TE721 User Manual

CPE User Manual V0.1

6.1.2 To mount the CPE to wall

To mount the CPE to wall, follow the steps below:

Figure 6-1-2-1 To mount the CPE to wall

6.1.3 Install the USIM card:

This CPE is specially designed for the 4G LTE network. Please check that you have a valid

USIM card from the service provider.

1. USIM Card Slot

This slot is for inserting the USIM card.

2. PoE Port

This Port is used for connecting PoE Power Supply using an Ethernet Cable (This cable must

have all four pairs connected to the RJ45 connector). Do not use low cost cables that have only

two pairs connected.