User's Manual

Telrad CPE12000 User Manual
CPE User Manual V1.5
23
Figure 5-6-2-1 Iperf
 Status: Default value is “Enable”
 Server Address: Default value is “8.8.8.8”
 Server Port: Default value is “5001”, the range is 1024~65535
 Management Port: Default value is “5001”, the range is 1024~65535
 Measurement Time: Default value is “60”
 Protocol Type: TCP/UDP
 Windows size: Default value is “256”
 TCP Client Number: Default value is “1”, the range is 1~10
5.6.3 Traceroute
On this page, you can Trace IP address by manual.
Figure 5-6-3-1 Traceroute