User's Manual

Telrad CPE12000 User Manual
CPE User Manual V1.5
16
Figure 5-2-3-1 LAN
 LAN Reset: Restore of LAN default setting.
 Duplex: Autot/Full/Half
 Max Bit Rate: 10Mbps/100Mbps/1000Mbps
 Local IP Address ： Enter the IP address of your router (factory default:
192.168.254.251).
 Subnet Mask：An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
 DHCP：Default Enable
 DHCP Address Allocation: Specify an IP address for the DHCP server to start and end
with when assigning IP address.
 DHCP lease time: The Lease Time is the amount of time a network user will be allowed
connection to the router with their current dynamic IP address. Enter the amount of
time in minutes and the user will be "leased" this dynamic IP address. After the time is
up, the user will be assigned a new dynamic IP address automatically.
 Static IP - IP/MAC binding function, the system will assign a fixed IP address to the
MAC according to the rules.
5.2.6 VPN
A virtual private network (VPN) is a point-to-point connection across a private or public
network (Internet).
VPN Passthrough allows the VPN traffic to pass through the router. Thereby we can
establish VPN connections to remote network.