User's Manual

EFLINKM1002X User Manual
AsiaTelco Technologies Co. Proprietary/Confidential 12/08/2016
13
4.4.1InternetConnection
Clickon“InternetConnection”,youcan configurethe “InternetConnection”
settingshere(pleaserefertochapter4.2.2),youshouldclick“Save”tosaveall
changes.
4.4.2TrafficStatistics
TrafficStatisticsdisplaysthenumberofpacketssentbyyourrouter.

Figure4‐4‐2‐1TrafficStatistics
4.4.3PINManagement
Click “PIN Management” to turn to the PIN management interface.The
defaultPINcodeisemptyanddisabledenterany4‐8digitsinthedialog,andthen
click“EnablePIN”toenablethePINfunction(Figure4‐4‐3‐2).Afterenabledthe
PINcode,youcanenterthecurrentrightPINcodetodisablethePINfunctionor
change the PIN code, only 3 times failure attempt is allowed, ifnot,thesystem
wouldaskyoutoinputthePUKcode,youcantryitfor10times. If you failed
finally,theUSIMcardwouldbelockedandinvalid.