System Manual

ManualsBrandsTelrad Networks ManualsComputers & AccessoriesLTE Outdoor Base Station

100

BreezeCOMPACT System Manual

Chapter 3: Operation and Administration

Procedures

Software Upgrade Via SSH

Wait until the new version appears in the back-up-sw version, as shown below:

BreezeCOMPACT1000>show device

device general product-type COMPACT

device general product-subtype ENB

device general compact-model-type BreezeCompact1000

device inventory hw-ver 002-001-00

device inventory serial-number 95009785

device inventory main-sw-ver 0609.07358

device inventory backup-sw-ver 0609.07395

device inventory running-sw MainSW

device inventory boot-ver 0608.03.00045

device inventory up-time 2018-02-19T14:19:54+00:00

device inventory temperature 40

3.4.2.5

Resetting the BreezeCOMPACT from the Backup Bank

The following procedure describes how to reset the eNodeB from the backup bank in order to

load the eNodeB software version from a backup.

¾ To reset the eNodeB from the backup bank:

At the B

BreezeCompact>

prompt, type r

request software-upgrade reset-from-backup

. The

following message displays:

The reset will disrupt all services provided by the device. The device will come up with the

backup v

ersion. Are You sure? [no,yes]

Type y

yes

After the eNodeB is up, type s

show status device

at the B

BreezeCompact>

prompt:

The line highlighted in yellow below shows the current software version.