System Manual

BreezeCOMPACT System Manual
94
Chapter 3: Operation and Administration
Procedures
Software Upgrade Via
SSH

Preparing the TFTP Server,
page 94

Configuring the TFTP Server,
page 94

Copying the BreezeCOMPACT Software to the TFTP
Server
,
page 94

Loading a New Software Version to the Backup
Bank
,
page 94

Resetting the BreezeCOMPACT from the Backup Bank,
page 95



Setting the BreezeCOMPACT Version in the Backup Bank as the Main
Software
Version
,
page 95
3.4.2.1
Preparing the TFTP Server
¾ To prepare the TFTP server:
 Set the TFTP server on BreezeVIEW. Refer to the TFTP Server Installation and
Configuration
section in the BreezeVIEW Installation Manual for details.
3.4.2.2
Configuring the TFTP Server
¾ To set the TFTP server in the CLI:
1
At the B
BreezeCompact%
prompt, enter the following command:
65 set device management tftp-ip-address <TFTP IP Address- Breeze View IP>
2
Perform the commit procedure as per 3.1.
3.4.2.3
Copying the BreezeCOMPACT Software to the TFTP Server
¾ To copy the BreezeCOMPACT software to the TFTP server:
1
Copy the new BreezeCOMPACT software version to the T
TFTP
directory.
2
When using BreezeVIEW as the TFTP server, copy the new BreezeCOMPACT version
using an SFTP program (such as FileZilla) to the eNodeB software version directory
(/
/opt/lte/Data/FirmwareSW/ENB
).
3.4.2.4
Loading a New Software Version to the Backup Bank
¾ To load a new software version to the backup bank (shadow):
1
At the B
BreezeCompact>
prompt, type r
request software-upgrade load-to-backup file-name
“compact version
(including extension)”
”
.
For example, COMPACT0608B.05643
The following displays:
This action will download the software image from the TFTP server
.
Are You sure?
[no,yes]
2
Type y
yes
.