System Manual

BreezeCOMPACT System Manual
92
Chapter 3: Operation and Administration
Procedures
BreezeCOMPACT Full Configuration via CLI
Figure 59: QoS Configuration
−
1
12
Define timing parameters by:
62 Setting the GPS configuration. If the BreezeCOMPACT is a GPS Slave, set the GPS
Master/Slave field to Slave
63 Setting of the GPS Type :
a. Trimble GPS PNs : 700250/700258 BMAX-4M-GPS
b. Origin GPS PN : 700275 BreezeGPS
64 . Setting the NTP IP Address. It is possible to set more than 1 IP address as
NTPThesystem will use the NTP as a backup only to the GPS.
Figure 60: Timing Configuration
13
Click the button.
The following window displays:
Figure61: Confirm Save
14
Click O
OK
to confirm.
15
In the A
Actions
menu, reset the device by selecting R
Reset
to Factory Defaults.