System Manual

BreezeCOMPACT System Manual
90
Chapter 3: Operation and Administration
Procedures
BreezeCOMPACT Full Configuration via CLI
Figure 54: External Management Interface
−
2
8
Define the cell configuration by:
43 Adding the PLMNID to the PLMN Identity List.
44 Setting the RAN Common parameters,
45 Setting the RAN RF parameters.
46 Setting the cell’s T
TAC
value.
Figure 55: Cell Configuration
Part of the parameters such as: Cell ID, Central Frequency and Physical
Cell ID are now
under Cell1 (please refer to the picture below)
9
Define HOs using the BreezeVIEW GUI by:
47 Defining the handover A5 triggers in the cell.
48 Defining the T
Trigger Quantity
as R
RSRP
.
49 Defining the A5 thresholds for Trigger 1 and Trigger 2.
Figure 56: Handover Configuration –A5