System Manual

BreezeCOMPACT System Manual
89
Chapter 3: Operation and Administration
Procedures
BreezeCOMPACT Full Configuration via CLI
5
Define the device’s antenna topology information, as shown below.
Figure 50: Device Capability
Also you can define here the Frame structure sub frame assignment as well as the special
sub frame pattern.
Figure 51: Device Capability
6
Define the device’s networking information, as shown in Figure .
Figure 52: Device Networking Information
7
If the system is operating in Unified mode, check the U
Use Bearer Interface as External
Management
checkbox.
Figure 53: External Management Interface
−
1
If the system is operating in Inband mode, uncheck the U
Use Bearer Interface as External
Management
checkbox: