System Manual

BreezeCOMPACT System Manual
87
Chapter 3: Operation and Administration
Procedures
BreezeCOMPACT Full Configuration via CLI
3.3.4
Enhanced log collection
Enhanced log Collection located at tmp and in case of reset /mnt/flashes/ backup (only in case
of eNB reset)
To upload log files to TFTP server use the following command:
request usage upload-logs-files destination-ip-address <IP address> destination-path
<destination pat
h>
3.3.5
Configuration of backup & restore to external TFTP
3.3.5.1
Create and Save (backup) the configuration file on TFTP
server.
 To create configuration file:
request config-file create-config-file
This action will create a configuration file,
which later can be uploaded to an external TFTP server.
Are You sure? [no,yes]
yes
Status Success
 Check in system events that create-config-file-completed by command:
show notification stream alarm
 Upload configuration file to external TFTP server by command:
request config-file upload-config-file destination-ip-address <IP address> destination-path
<destinat
ion path>
 Check in system events that upload-config-file-completed by command:
show notification stream alarm
3.3.5.2
Download and Restore (restore) the configuration file from
TFTP server.
 To upload configuration file:
request config-file upload-config-file destination-ip-address <IP Address> destination-path
<destination path>
This action will upload device configuration file to an external tFTP server.
Are You sure? [no,yes] y
yes