System Manual

BreezeCOMPACT System Manual
64
Chapter 3: Operation and Administration
Procedures
BreezeCOMPACT Full Configuration via CLI
show status ran port
result is:
PortsList 1 {
operational-status InService; admin-state InService;
}
PortsList 2 {
operational-status InService; admin-state InService;
}
PortsList 3 {
operational-status InService; admin-state InService;
}
PortsList 4 {
operational-status InService; admin-state InService;
}
On BreezeVIEW :
When clicking on the BREEZEVIEW home->devices->ENB ->device details :
Figure 33: BREEZEVIEW -ENB Antenna's status in SplitMode2x2
When looking on Breeze view on the ENB deployment tab:
Figure 34: BREEZEVIEW -ENB deployment tab when in SplitMode2x2
On SplitMode2x2 all 4 antennas are fully operational. All Antenna's will work with the same
frequency.
3.3.2.3.6
SplitModef1f2:
Split mode f1f2 enabling each 2x2 sector (port 1,2 and port 3,4) to define different center
frequencies.
On BreezeCOMPACT CLI from BreezeCompact% prompt perform the following in order to set: