System Manual

BreezeCOMPACT System Manual
Chapter 1: System
Description
6
[e-mail]
Canadian Radio Standards Specifications (RSS) Compliance Statement
This device has been designed to operate with the antennas listed in “Antennas” on page 28,
and having a maximum gain of 18 dBi. Antennas not included in this list or having a gain
greater than 18 dBi are strictly prohibited for High-density areas of use with this device. Low-
density areas can use a higher-gain Antenna.
To reduce potential radio interference to other users, the antenna type and its gain should be
so chosen that the Equivalent Isotropically Radiated Power (EIRP) is not more than that
permitted for successful communication.
R&TTE Compliance Statement
This equipment complies with the appropriate essential requirements of Article 3 of the
R&TTE Directive 1999/5/EC.
Safety Considerations – General
For the following safety considerations, “Instrument” means the BreezeCOMPACT units'
components and their cables.
Grounding
The BTS chassis is required to be bonded to protective grounding using the bonding stud or
screw provided with each unit.