System Manual

BreezeCOMPACT System Manual

Chapter 2: Commissioning Steps

In This Chapter:

 B

BreezeCOMPACT Commissioning,

on page 48

2.1

BreezeCOMPACT Commissioning

2.1.1

Preface

2.1.1.1

For Un-License Markets:

Before commissioning BreezeCOMPACT or BreezeU100 at 5.XGHz Bands please refer

to 5GHz band warning on page 7. All RF configurations are subject to local/regional

regulations by Operator

2.1.1.2

For CBRS Markets:

Before commissioning BreezeCOMPACT please refer to CBRS band warning on page 7.

All RF configuration is handled by CBSD configuration within BreezeView Domain

proxy

SAS Communication is required as are necessary parameters detailed on page 7. All

parameters below must be populated for the Category B CBSD. Telrad standard 65 degree

antenna is 17.5dBi. This 17.5 dBi will be computed as part of MAX EIRP. MAX EIRP will be

granted by the SAS based. Assuming no coexistence requirements or incumbent protection this

EIRP would be 47dBm/10MHz. Based on 2x2 MiMO the Compact could use up to 30dBm per

port i.e. 30dBm (MiMO per port cross polarized) + antenna gain 17.5dBi - .5dB cable loss =

47dBm EIRP. When using 4x4 (TM4) The max TX power would be 27dBm to account for MiMO

Array Gain.

Figure 21: SAS Server Setting Screen